With Viking, you can have professional-quality refrigeration systems in the comfort of your own house. It makes good sense that you wouldn’t intend to trust your financial investment to simply any kind of appliance repair business. That’s why you ought to call the Viking fridge fixing specialists.
We provide superior Viking refrigerator repair solution seven days a week. Our service technicians are on call everywhere near your area. When you need premium support for your premium fridge, call us.
The control system of your Viking fridge keeps an eye on the crucial components of the unit. If a fault is detected, the digital screen offers a mistake code to help find as well as fix the concern.
The first step to solving any type of issue is to verify the mistake is legitimate. To confirm a mistake code, you will certainly require to reboot the refrigerator.
To reboot your fridge:
Unplug the fridge from the wall or switch off power to the outlet at the breaker.
Wait five minutes.
Return power to the fridge.
If the error code returns, it is a legit mistake. Describe the adhering to chart for additional fixing aid.
Error Code Detection
The microprocessor in the control constantly keeps an eye on important refrigeration system parts for appropriate operation. If part parameters go beyond regular operating requirements, an audible alarm will sound six (6) times every min and the display screen will instantly flash the particular error code. If multiple errors are kept in mind with the system, the error codes will be displayed sequentially.
Warning Alarm system
The Tru Protect ™ system will certainly inform you if the device is not functioning properly. It offers both aesthetic and also audible informs if the temperature rises above or drops listed below the set temperature, if there is a power failing, or if the door is left ajar.
- Door Ajar: If the door is exposed for more than 5 (5) minutes, a distinct alarm will certainly sound 3 (3) times every 30 secs and also the LED light will certainly flash eco-friendly. This will certainly stop as soon as the door is shut.
- High and Low Temperature Level: If the system reaches a temperature level either over or listed below the set factor temperature level for greater than one (1) hour, an audible alarm will certainly seem 6 (6) times every min as well as the LED will flash red. This will continue till the alarm is reset. The alarm may take place when altering set-points over of 10 levels F and/or high use which is normal.
- Power Failure: If the system experiences a power failure, the LED will certainly flash brownish-yellow. This will certainly proceed until the alarm is reset. With a power failure, no audible signal is heard. The alarm system may take place upon initial setup which is regular considering that the system was gone for the manufacturing facility to confirm top quality.
Resetting the Alarm systems
Close door to reset Door Open alarm system. Press the “ON/OFF” button for about one (1) 2nd to reset all various other audible and also show alarms.
NOTE: Although pressing the “ON/OFF” button will certainly reset the alarms, the alarm system will resume if the “alarm condition” still exists.
Service Diagnostics Setting
Service Diagnostics Mode allows you to recognize the firmware and also software versions, examination standing of “model specific” system elements and sensing units, and alter state of parts where appropriate (i.e.– compressor on/off, and so on.).
ERROR CODE | CAUSE | SOLUTION |
Lo | The refrigerator is too cold. | If the refrigerator is too cold, it may freeze food items that should not be frozen. To resolve the issue, lower the temperature settings for your unit. |
If the settings are as they should be, inspect the door gasket around the refrigerator. If there is a leak, your refrigerator may work in overdrive to keep the compartment cool. |