With Viking, you can have professional-quality refrigeration systems in the convenience of your very own home. It makes good sense that you wouldn’t wish to trust your investment to simply any kind of device repair work business. That’s why you must call the Viking refrigerator repair experts.
We provide premium Viking fridge repair solution seven days a week. Our service technicians get on call all over near your location. When you need exceptional support for your premium fridge, call us.
The control device of your Viking fridge keeps an eye on the vital parts of the device. If a mistake is identified, the electronic display provides an error code to assist find and also repair the issue.
The initial step to dealing with any concern is to validate the error is legitimate. To confirm a mistake code, you will need to reboot the refrigerator.
To reboot your fridge:
Unplug the refrigerator from the wall or switch off power to the outlet at the circuit breaker.
Wait 5 minutes.
Return power to the refrigerator.
If the error code returns, it is a genuine mistake. Refer to the adhering to chart for further troubleshooting support.
Mistake Code Detection
The microprocessor in the control constantly keeps an eye on crucial refrigeration system elements for correct procedure. If element parameters exceed typical operating requirements, an audible alarm system will appear six (6) times every min as well as the display will instantly blink the corresponding error code. If multiple mistakes are noted with the system, the mistake codes will certainly be displayed sequentially.
Warning Alarm
The Tru Protect ™ system will certainly educate you if the system is not working correctly. It gives both aesthetic as well as distinct notifies if the temperature rises above or falls listed below the set temperature, if there is a power failure, or if the door is left open.
- Door Ajar: If the door is exposed for more than 5 (5) minutes, an audible alarm system will certainly appear three (3) times every 30 secs and also the LED light will certainly flash environment-friendly. This will certainly quit as soon as the door is closed.
- High and Low Temperature: If the device gets to a temperature level either above or below the set factor temperature for more than one (1) hour, an audible alarm system will appear six (6) times every min and also the LED will blink red. This will proceed up until the alarm is reset. The alarm system may take place when transforming set-points over of 10 levels F and/or high use which is normal.
- Power Failing: If the system experiences a power failure, the LED will certainly flash amber. This will certainly proceed up until the alarm is reset. With a power failure, no audible signal is heard. The alarm might occur upon first installment which is regular because the device was run at the factory to validate high quality.
Resetting the Alarms
Close door to reset Door Ajar alarm. Press the “ON/OFF” switch for roughly one (1) second to reset all various other distinct as well as show alarms.
KEEP IN MIND: Although pushing the “ON/OFF” button will reset the alarm systems, the alarm will certainly resume if the “alarm condition” still exists.
Service Diagnostics Mode
Service Diagnostics Setting enables you to identify the firmware and software program variations, examination standing of “design details” system parts and also sensors, as well as alter state of parts where applicable (i.e.– compressor on/off, and so on.).
ERROR CODE | CAUSE | SOLUTION |
do | The refrigerator is open. | If your refrigerator door is open for too long, an alarm will sound. Close the refrigerator door to resolve the alarm. |