Software Model Number
Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Fridge Diagnostic Info
Solution Diagnostics Setting enables you to determine the firmware as well as software variations, examination standing of “model certain” system components as well as sensors, as well as change state of parts where suitable (i.e.– compressor on/off, etc.).
Enabling Service Mode: To make it possible for Service Mode, press and hold the “WARMER” switch while pushing the “COLDER” button four times within five seconds.
- You can not allow Service Mode while in Set Setting. – All system features will certainly remain in their present state while in Service Mode.
- Alarm systems are impaired throughout Solution Mode and also reset after leaving Solution Setting.
- Solution Mode will immediately disable after five (5) minutes of no keypad entrance
After getting in Service Mode, the first number that you will see indicates the software application design number for the particular system you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the very first number you will certainly see is 11. See chart listed below for equivalent model and also software application reference.
The 2nd number you will see shows the software application variation launch. For instance, if you see 44 on the screen panel it shows software version 4.4.
Diagnostics:
While in Service Setting, press the “SET” button to tip with Tests 0-9. The very first digit of the display screen will show the test number. The 2nd figure indicates the present state of each part under examination and is presented as “1” getting on, CLOSED, or SHORTED and “0” being OFF or OPEN. Examinations 0 and 1 reveal an open or shorted condition discovered at the sensing unit inputs. Tests 2 with 6 permit you to turn lots ON with the “WARMER” switch and also OFF with the “COLDER” button. Examinations 7 through 9 confirm state adjustment of the door switches and/or magnetic reed sensing unit. The part tests offered are defined in Offered Element Tests graph.
PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
Refrigerator or ice maker makes unfamiliar sounds or seems too loud | Normal operation |