Sub-Zero is the embodiment of style as well as performance refrigeration. It isn’t simply a home appliance, your Sub-Zero is an essential element of your ideal kitchen. It makes good sense that you wouldn’t want to trust your fridge to just any device fixing business. You want a group of Sub-Zero refrigerator repair work specialists that can secure your investment while supplying the costs service you should have.
It Is Fixed Appliance Fixing is the company you must trust with every one of your Sub-Zero repair demands. Our specialists focus on Sub-Zero service so you can trust that we have the skills to finish the job right.
HOW TO USAGE THE MISTAKE CODE TROUBLESHOOTING OVERVIEW
Error Codes show problems signed up by particular components. If error codes are registered, they will certainly appear before temperature level analyses while in Diagnostic Setting.
KEEP IN MIND: If Mistake Codes appear with a blinking “SERVICE” annunciator before launching Diagnostic Setting, the device experienced extreme compressor run problem that might or may not be connected with the Error Codes displayed
To initiate Diagnostic Mode, press as well as hold either COLDER trick, then press the POWER key, then release both secrets. Currently, inspect to see if Mistake Codes exist, being sure to toggle through all error and also temperature analyses by pushing either COLDER vital or either WARMER key. (See Error Code Table Below).
If Error Codes appear during Diagnostic Setting, adhere to the Mistake Code Troubleshooting Overview on the adhering to web page. The left column of the troubleshooting guide details the error codes. The information in the right column explains what tests to do and/or what action to take to correct the mistake.
NOTE: If error codes are observed in diagnostic mode, a non-flashing SERVICE annunciator will certainly show up on the LCD when Diagnostic Mode ends, suggesting mistake codes are still kept. Mistake Codes should be removed from the digital control memory by hand. To remove the non-flashing SOLUTION annunciator and the error codes, the trouble should be fixed and also the device has to be ON, after that:.
Error Code Table
| CODE | INDICATION |
| 05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
| 21 | Defrost overheat |
| 22 | No voltage feedback through Gray/White wire at defrost start |
| 23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
| 24 | Defrost under-heat |
| 30 | N/A |
| 40 | Excessive Freezer Compressor Run |
| 50 | Excessive Refrigerator Compressor Run |
| Error Code | CAUSE | SOLUTION |
| Error Code 30 | Icemaker Not Working Properly | Check the icemaker to ensure it is not jammed. Ice or other material may be jammed inside the icemaker. If an obstruction is not detected, contact a service repair person to inspect the electrical connections and continuity between the ice maker and control board. |
Error Code 05.
A. If “EE” for fridge area was displayed and also “SOLUTION” flashing, examine the following:.